Adjusting The Projected Image ("Scr - Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Keystone Correction - Sharp PG-D4010X Operation Manual

Adjusting the Projected Image ("SCR - ADJ" Menu)

Pict. SCR-ADJ
Resize
Image Shift
Keystone
Overscan
OSD Display
Closed Caption
Background
PRJ Mode
Language
SEL./ADJ.

1 Setting the Resize Mode

Note
• For details of the Resize mode, see pages
30 and 31.
• You can also press RESIZE on the remote
control to set the resize mode. (See page 30.)
2 Adjusting the Image
Position
You can move the projected image vertically.
O button
Note
• This function only works in some RESIZE
modes. (See pages 30
PRJ Net. Help
Border
0
0
On
On
Off
Logo
Front
English
ENTER END
Q button
and 31.)
Menu operation n Page

3 Keystone Correction

When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Select "Keystone" on the "SCR-ADJ"
menu and adjust with the slide bar.
See page 28 for details of Keystone Correction.
Q button
Note
• The Keystone Correction can be adjusted up
to an angle of approximately ±40 degrees
(when "Resize" is set to "Normal").
• You can also press KEYSTONE on the
remote control or on the projector to adjust
Keystone Correction.

4 Setting the Overscan

This function allows you to set the overscan area
(display area).
Selectable
items
On The input area is displayed without the
screen edges.
Off The whole input area is displayed.
Note
• You can set "Overscan" for the following input
signals (Computer, DVI-D Video and DVI-
Analog).
—480P, 540P, 576P, 720P, 1035I and
1080I/1080P
• If noise appears at the screen edges when
"Off" is selected, set the function to "On".
• Also see "About Copyrights" on page 31.
38
O button
Description
43