Adjusting The Projected Image ("Scr-Adj" Menu); Setting The Resize Mode; Adjusting The Image Position; Adjusting The Overscan - Sharp XV-Z15000U Operation Manual

Adjusting the Projected Image ("SCR-ADJ" Menu)

The illustration shown here is for explanation and may
be different from the actual on-screen display.
Picture
SIG-ADJ
Resize
H-Image Shift
V-Image Shift
Overscan
Auto V-Keystone
Keystone Mode
H-Keystone
V-Keystone
Sphere
Rotation
OSD Display
OSD Brightness
Background
Menu Position
PRJ Mode
Language
SEL./ADJ.
RETURN

1 Setting the Resize Mode

Note
• For details of the Resize mode, see page 29.
• You can also press RESIZE on the remote
control to set the resize mode. (See page 29.)

2 Adjusting the Image Position

You can move the projected image horizontally or verti-
cally.
■ H-Image Shift
\ button
Selectable items
H-Image Shift Leftward
\ button
-42
SCR-ADJ PRJ-ADJ
Normal
0
0
On
Keystone
0
0
0
0
On
Standard
Logo
Upper Left
Front
English
ENTER
END
| button
Rightward
| button
■ V-Image Shift
\ button
Selectable items
V-Image Shift Downward
\ button
Note
• Depending on the Resize mode, Picture mode
or the input signal resolution, the range of the
image shift may be limited.

3 Adjusting the Overscan

This function allows you to adjust the Overscan area
(display area).
Selectable items
The input area is displayed without screen
On
edges.
Off The whole input area is displayed.
Note
• You can adjust the Overscan area for the fol-
lowing input signals and the RESIZE function.
I
- Input signal: 480 /480P, 540P, 576
I
720P, 1035 or 1080
- RESIZE function:"NORMAL", "STRETCH",
"CINEMA ZOOM" or "ZOOM 14:9"
• If the display area ratio is set too large, noise
may appear at the screen edges. If this hap-
pens, set the display area ratio to a smaller
value.
• Also read "About Copyrights" on page 30.
Menu operation ⇒ Page 34
| button
Upward
| button
Description
I
/576P,
I
/1080P