Power On; Initial Settings Of Operation Panel - Sharp AR-153E Operation Manual

POWER ON

Turn the power switch on the left side of the unit to the "ON" position. The start (
indicator will light up.
• The unit will enter a power save mode once the set time has elapsed
without any unit operation. The settings of the power save modes can
be modified. See "USER PROGRAMS" (p.23).
• The unit will return to the initial settings a preset amount of time after
the end of copy or scanner job. The preset amount of time (auto clear
time) can be changed. See "USER PROGRAMS" (p.23).
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start (
The unit adjusts the scan head lamp periodically to maintain copying quality. At this
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.

Initial settings of operation panel

When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.22) elapses after a copy or scanner
job is finished, or when the clear (
The initial settings of the operation panel are shown below.
When copying is begun in this state, the settings in the following table are used.
Copy quantity
Exposure adjustment
Zoom
Tray
Original to copy (AR-157E)
) indicator is illuminated).
) key is pressed twice.
"0" is displayed in the display.
1 copy
AUTO
100%
Paper tray 1
The "Original to copy" indicator does
not illuminate. (One-sided copying only)
)
3
13