Set - Planet Networking & Communication IKVM-210 M Series User Manual

3.3.6 SET

SET function configures the OSD menu. Move the highlight bar to an option, and press [Enter] to enter
a setting option.
Parameters
OSD ACTIVATING
HOTKEY
SWITCH HOTKEY
CHANNEL DISPLAY
MODE
CHANNEL DISPLAY
DURATION
CHANNEL DISPLAY
POSITION
SCAN DURATION
SET PASSWORD
Select OSD activating hotkey.
Select the switch hotkey to switch PC.
Mode of small tip window. Choices and meanings are below:
PN + NAME / PN / NAME
Move the highlight bar to an option and press [Enter] to select it.
Time the tip window last. Options are following:
3 SECOND The tip window lasts for 3seconds.
ALWAYS ON The tip window always on the screen.
Move the highlight bar to an option and press [Enter] to select it.
Position of the tip window.
A small blue window appears on the screen. Use arrow key to move
it, and then press [Enter] to specify the position.
Duration for scanning one port
Options are 3 seconds, 5 seconds, 10 seconds, 15 seconds, 20
seconds, 30 seconds, 40 seconds, 60 seconds. Move the highlight
bar to an option and press [Enter] to select it.
Set new password. The password permission is for user.
First enter old password, then enter new password and confirm it.
The new password is set. If error occurs, the screen will remind
users.
26
- -
8-/16-port Combo LCD KVM Switch
IKVM/KVM-210 M Series
Description