Removing The Machine From Storage - Toro 22290 Operator's Manual

6. Service the air filter; refer to
Filter (page 21).
7. Tighten all nuts, bolts, and screws.
8. Touch up all rusted or chipped paint surfaces
with paint available from an Authorized Service
Dealer.
Removing the Machine
from Storage
1. Check and tighten all fasteners.
2. Remove the spark plug and spin the engine
rapidly using the starter to blow out the excess
oil from the cylinder.
3. Clean the spark plug or replace it if it is cracked,
broken, or if the electrodes are worn.
4. Install the spark plug; refer to
Spark Plug (page
5. Perform any needed maintenance procedures;
refer to Maintenance (page
6. Fill the fuel in the fuel tank with fresh fuel.
7. Check the engine-oil level.
8. Connect the wire to the spark plug.
Servicing the Air
Servicing the
22).
21).
27