Specifications; Led Indicators; Sd Card Slot; Buttons - Axis M1124-E User Manual

AXIS M11–E Network Camera Series

Specifications

Specifications
To find the latest version of the product's datasheet, go to the product page at axis.com and locate Support & Documentation.

LED indicators

Note
The Status LED can be configured to flash while an event is active.
Status LED
Green
Amber
Network LED
Green
Amber
Unlit
Power LED
Green
Amber

SD card slot

NOTICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 20.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
24