Ptz (Pan Tilt Zoom) - Axis M1124-E User Manual

AXIS M11–E Network Camera Series
Setup
7. Go to System > Events > Rules and add a rule.
8. Type a name for the rule.
9. In the list of conditions, select AXIS Video Motion Detection.
10. In the list of actions, select Use overlay text.
11. Select a view area.
12. Type "Motion detected".
13. Set the duration.
14. Click Save.

PTZ (Pan Tilt Zoom)

Limit the pan, tilt, and zoom movements
As an example, you might need to protect the privacy of residents living in apartment buildings located close to a parking lot that
you wish to surveil. To do this, you can limit the pan, tilt, and zoom movements, so that the view does not cover the apartment
buildings. Go to Settings > PTZ > Limits.
See above the horizon
In some cases, you might want to look above the default upper tilt limit to see above the horizon.
1. Go to Settings > PTZ > Limits
2. Set the upper limit to the maximum value and click Save.
About guard tours
A guard tour displays the video stream from different preset positions either in a predetermined or random order, and for configurable
periods of time. Once started, a guard tour continues to run until stopped, even when there are no clients (web browsers) viewing the
images.
Create a guard tour with preset positions
1. Go to Settings > PTZ > Guard tours
2. Click +.
3. Select Preset position.
4. To edit the guard tour's properties, click
5. Type a name for the guard tour and specify the pause length in minutes between each tour.
6. If you want the guard tour to go to the preset positions in a random order, turn on Shuffle.
7. Click Done.
8. Click Add to add the preset positions that you want in your guard tour.
9. Click Done to exit the guard tour settings.
10. To schedule the guard tour, go to System > Events.
14