Connecting To The Wi-Fi Network - HANNspree HANNSpad SN14T72 User Manual

2.2 Connecting to the Wi-Fi Network

A Wi-Fi connection makes it easy to connect to the Internet. Once you have successfully connected
to a Wi-Fi network, the device will automatically connect to the network when you are within range.
To configure the Wi-Fi connection, do the following:
1. Tap and drag the status bar downward to open the notification panel.
2. On the Quick Settings screen, tap SETTINGS.
3. Turn on Wi-Fi. The device searches for available networks within range and displays the
searched Access Point (AP) names on the right panel.
NOTE:
Tap the Wi-Fi switch button to turn Wi-Fi on or off.
• The Wi-Fi icon showing
• The Wi-Fi icon showing
4. Tap an access point name that you want to connect to. If the selected access point is
protected by a password, the device will prompt for the password.
5. If prompted, enter the password to connect to the AP.
NOTE:
• The password entry is required only when connecting to the AP for the first time.
• To make the Wi-Fi password visible while typing it, select the "Show password" checkbox.
6. Tap Connect.
NOTE:
• Some public places offer free wireless internet access. This means no password is required to establish
the connection.
• For secured networks, you may need to enter several parameters to complete the settings. If you are not
sure about the parameters, please contact your local Internet Service Provider (ISP).
• This tablet PC keeps track and recognizes Wi-Fi networks that have been connected before. Once Wi-Fi is
turned on and a known connection is detected, the device automatically connects to that network.
indicates Wi-Fi is turned off.
indicates Wi-Fi is turned on.
10