Nikon SB-600 Instruction Manual page 37

●●●
Setting the flash output level
The flash output level changes every time you press the j or i button, as
shown below.
When you press the j button:
When you press the i button:
• The numbers in parentheses represent the adjustable flash output level in
except between 1/1 and 1/2. Therefore, 1/2 (-0.7) and 1/4 (+0.3) represent the same
flash output level.
• To extend the flash shooting distance, choose a flash output level close to M1/1.
• The value can be quickly changed by continuously pressing the i or j button.
• The decimal place blinks during adjustment.
All manuals and user guides at all-guides.com
6
Confirm that the ready-light comes on, then shoot.
=
The same flash
output level
1/3 step
37