MSI 7978-003R Manual page 83

3. Reboot to Windows
Failed Hard Drive Member
1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter.
1.
2.
"Degraded" volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
RAID Volumes :
None defined.
Physical Devices :
Port Device Model
1 XXXX-XXXXXXXX
2 XXXX-XXXXXXXX
[ ↑↓] - Select
5. Exit IRST Option ROM, reboot to Windows
6. When prompted to rebuild the RAID volume, click Yes.
7. The Intel Rapid Storage Technology application will be launched. Right-click
®
the new hard drive and select Rebuild to this Disk. The Rebuild Wizard will be
launched which will guide you through the process of rebuilding to the new hard
drive.
; the rebuild will occur automatically.
®
[ MAIN MENU
Create RAID Volume
[ DEGRADED VOLUME DETECTED
Delete RAID Volume
5.
[ DISK / VOLUME INFORMATION
Select the port of the destination disk for rebuilding (ESC to exit):
Port Drive Model
1 XXXX-XXXXXXXX
Serial #
XXXXXXXXXXXXXX
[ ↑↓] - Previous/ Next
XXXXXXXXXXXXXX
[ESC] - Exit
]
4. Recovery Volume Options
]
4. Recovery Volume Options
Exit
]
Serial #
XXXXXXXXXXXXXX XXX.XGB
Size Type/Status (Vol ID)
XXX.XGB Non-RAID Disk
[ENTER] - Select [ESC] - Exit
XXX.XGB Non-RAID Disk
[ENTER] - Select Menu
.
®
RAID Configuration (optional)
Size
83