Biostar Hi-Fi A88S3+ Setup Manual page 15

PANEL1: Front Panel Header
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case's front panel switch
functions.
Pin Assignment
1 +5V
2 N/A
3 N/A
4 Speaker
5 HDD LED (+)
6 HDD LED (-)
7 Ground
8 Reset control
SATA1~SATA4: Serial ATA Connectors
These connectors connect to SATA hard disk drives via SATA cables.
Hi-Fi A88S3+ & Hi-Fi A78S3+ satisfy the SATA 3.0 spec and with transfer rate of
6.0Gb/s.
The SATA4 (SATA4-U/SATA4-L) connector is only for Hi-Fi A88S3+.
Hi-Fi A88S3+/Hi-Fi A78S3+
Function Pin Assignment
9
10
Speaker
Connector
11
12 Power LED (+)
13 Power LED (+)
Hard drive LED
14 Power LED (-)
15 Power button
Reset button
16
Function
N/A
N/A
N/A
N/A N/A
Power LED
Power-on button
Ground
Pin Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
7 Ground
13