27 FOR SCHEMATIC DIAGRAM
27.1. Base Unit (SCHEMATIC DIAGRAM (BASE UNIT))
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
Important Safety Notice:
Components identified by
any of these components, use only the manufacturer´s specified parts.
27.2. Handset (SCHEMATIC DIAGRAM (HANDSET))
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams and circuit board may be modified at any time with the development of new technology.
mark have special characteristics important for safety. When replacing
55
KX-TC2105LBB