Advertisement

Quick Links

INSTRUCTIONS FOR USE
Washing machine
W4086C.W.AU
WM75.1
W4086P.W.AU
W4086.P.T.AU
Carefully read the instructions for use before using the washing machine.

Advertisement

Table of Contents
loading

Summary of Contents for Asko W4086.P.T.AU

  • Page 1 INSTRUCTIONS FOR USE Washing machine W4086C.W.AU WM75.1 W4086P.W.AU W4086.P.T.AU Carefully read the instructions for use before using the washing machine.
  • Page 2: Table Of Contents

    Dear Customer, We thank you for purchasing this quality ASKO product. We hope it meets all your expectations. Scandinavian design combines pure lines, everyday functionality, and high quality. These are the key characteristics of all our products, and the reason why they are highly appreciated across the globe.
  • Page 3: Safety Precautions

    Keep the instruction manual handy, near the washing machine. • Instructions for use are available on our website at www.asko.com. • Your washing machine is intended solely for household use.
  • Page 4 • Bleaches that contain chlorine can be replaced with oxygen-based bleaches. Otherwise, a neutralization cycle should be performed by running the Cotton program at the highest temperature. For best results, use hydrogen peroxide or oxygen-based detergents. • Do not use colourants (dyes) or bleaching substances (substances for discolouration or removal of colourants) as they contain sulphuric compounds that could cause corrosion.
  • Page 5 regarding safe use of the washing machine, and if they understand the hazards of inappropriate use. Make sure children do not play with the appliance. Make sure the children do not clean the washing machine or perform any maintenance tasks without supervision. DANGER OF HOT SURFACE •...
  • Page 6: Washing Machine Description

    WASHING MACHINE DESCRIPTION Main switch (ON/OFF) Program selector knob Display unit Program settings buttons Button (start/pause) Detergent compartment QR and AUID code (on the inside of the washing machine door) Rating plate with information about the washing machine (on the inside of the washing machine door) Washing machine door 10.
  • Page 7: Before Using The Appliance For The First Time

    BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter ”DISPOSAL”). TRANSPORT PROTECTION Before using the appliance, remove the three transport bolts and plastic plugs which protect the appliance during transport.
  • Page 8 CLEANING Disconnect the washing machine from the power mains and open the door. Clean the washing machine drum with a damp cloth and a mild detergent. Connect the washing machine to the power mains and run the dedicated drum cleaning program. See chapter "WASHING PROCESS;...
  • Page 9: Installation And Connection

    If the appliance is installed on a plinth or a similar structure, then the appliance must be fi xed to it, to avoid the risk of falling. ASKO original accessories are available for this purpose, complete with fi xing instructions. Clearances around the washing machine min.
  • Page 10 Stacking an ASKO dryer on top of an ASKO concept or closet installation washing machine To stack an ASKO dryer on top of a washing ASKO's front panel controls make it possible to machine, use the extra vacuum feet and the tipping install the washers and dryers in a cabinet or closet.
  • Page 11 ADJUSTING THE FEET MOVING THE WASHING MACHINE AND TRANSPORT AFTER INSTALLATION Place the washing machine so that it is stable. 1. Level the washing machine in longitudinal and If you are moving the washing machine without traverse direction by rotating the adjustable feet packaging, open the washing machine door and pull (using a No.
  • Page 12 CONNECTING TO WATER SUPPLY CONNECTING TO HOT/COLD WATER SUPPLY The machine has to be connected to water (Only available in some models) supply by an adequately trained person. If your appliance has connections for both hot and cold water, then connect one hose to the cold Use the water supply hose to connect the appliance.
  • Page 13 INSTALLING THE DRAIN HOSE CONNECTING TO THE POWER MAINS After installation, the washing machine should stand still for two hours before it is connected to the power mains. Connect the appliance to an earthed power outlet. After installation, the wall outlet should be freely accessible.
  • Page 14 ASKO LAUNDRY CARE - HIDDEN HELPERS* Laundry care ironing board The ironing board is a clever solution. It is always handy when you need to iron your clothes, and it can be easily, safely and invisibly stored away when not in use.
  • Page 15 Laundry care plinth Thanks to the stainless steel plinth, your appliance will be raised by 30 cm, which makes loading and unloading of laundry easier. *AVAILABILITY DEPENDING ON MARKET DENOMINATION ART. No. IRONING BOARD HI1153 White 576552 IRONING BOARD HI1153 Stainless steel 732756 IRONING BOARD HI1153 Titanium 576553...
  • Page 16: Tips Before Washing

    TIPS BEFORE WASHING LAUNDRY SYMBOLS This chapter includes several tips on how to prepare the laundry for washing. Observe the laundry symbols. Textile maintenance symbols: LAUNDRY SORTING Washing Sort the laundry according to: • how soiled it is, Normal Delicate •...
  • Page 17 DYED COTTON ECONOMY AND EFFICIENCY Laundry made of dyed cotton which is to be washed You can save a lot of energy by not using the at 60 °C should be fi rst washed at a temperature of programs operating at higher temperatures. 60 °C to remove the excess dye.
  • Page 18: Washing Process, Step By Step (1 - 8)

    WASHING PROCESS, STEP BY STEP (1 – 8) STEP 1: SORT THE LAUNDRY See chapter "TIPS BEFORE WASHING" Use a washing net for underwire bras. Empty the pockets. Coins, nails etc. could damage the machine and the fabric. STEP 2: TURN ON THE MAIN SWITCH.
  • Page 19 STEP 4: ADD THE DETERGENT AND THE CONDITIONER. Recommended amount of detergent is usually specifi ed on the detergent packaging. When washing a smaller amount of laundry, the amount of detergent used can be decreased. Observe manufacturers' recommendations regarding the type of detergent suitable for certain temperatures, load size, and water hardness.
  • Page 20 STEP 5: CHOOSE THE PROGRAM. Choose the program by rotating the Program selector knob in either direction. The Program selector knob can be used when arrows appear on the display. Choose the program depending on the type of laundry and how heavily soiled it is (see chapter "TIPS BEFORE WASHING").
  • Page 21 Program Description QUICK Quick program for lightly soiled laundry. The program operates at certain temperatures; therefore, observe the instructions indicated on the clothing. A lower temperature setting will result in shorter duration of the wash. Spinning speed can be set to your preference. HEAVY Program for heavily soiled laundry.
  • Page 22 Program Description RINSE This program includes 2 cold rinses and a short spinning cycle. The program is suitable for laundry that only needs rinsing, and for cleaning cloths or mops. SPIN Use the program when you only wish to spin the laundry. DRAIN If you only wish to pump out the water from the washing machine, choose the Drain program.
  • Page 23 STEP 6: CHOOSING THE PROGRAM SETTINGS Using the program settings, the washing programs can be further adjusted to your wishes. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the washing cycle and may be changed subsequently (except for Delay start and Anticrease, which are not stored after the wash is complete).
  • Page 24 3. Spin speed By consecutively pressing the button 3, you can set the spin speed, choosing from the following available values: d (no drain) /... / max. (rpm) (max rpm = depends on the model) Default setting is 1400 rpm; it depends on the selected program (spin rate can be changed – reduced or increased (only in some models)).
  • Page 25 5. Delay start Press the button 5 to choose the delayed start when you wish the washing program to start after a certain period of time (30´ to 24 hours after you press the Start button). The estimated time remaining until the end of the washing program will be indicated above the button 5. Press the button 5 for the arrows to appear.
  • Page 26 STEP 7: START THE WASH Close the washing machine door and press the Start/Pause button. Start (short press of the button – start/resume) Pause (short press of the button – pause) Stop (press and hold for 3 seconds – stop or cancel) Info 2:20 Starting...
  • Page 27 Pausing, stopping or changing the program To pause the program, shortly press the Stop program Paused Add clothes Pause button. To resume a program, press the Start button again. To stop the washing program, press and hold for 3 seconds button Start/Pause. Use the button 1 to choose "Stop program".
  • Page 28 STEP 8: END OF PROGRAM After the end of the washing program, Start Cycle completed succsessfully the display will indicate that the program has been successfully completed ("Cycle completed successfully"). If you have selected the Anti-Crease Anti Stop anti creasing Cycle completed succsessfully creasing extra function, gentle tumbling will...
  • Page 29 Changing a favourite program If you wish to store a program after the end of the washing cycle, but there is no more room for another favourite program (only 4 favourite program slots are available), then one of the existing stored favourite programs can be substituted with a new one.
  • Page 30: System Settings

    SYSTEM SETTINGS In the main menu, use the Program selector knob to select System Settings. Confi rm the selection by pressing the button 2. Then, use the Program selector knob to scroll the list of the following settings that you can adjust: •...
  • Page 31 LANGUAGE You can choose between 24 languages. EU English Press the button 3 for the arrows to appear. Use the Program selector knob or the button 3 to scroll the list of languages. Use the button 6 to confi rm the selected language.
  • Page 32 DISPLAY UNIT Set the contrast and logo display. Display Contrast Logotype Back Use the buttons 1 to 5 to set the contrast. Use the button 1 to toggle logo display or off If you choose on , the logo will be displayed on the display unit when the washing machine is turned on.
  • Page 33: Special Features

    SPECIAL FEATURES DOSE ASSIST With the Dose Assist function, the washing machine will recommend the optimum amount of detergent according to the selected settings. Recommended amount of detergent depends on water hardness, selected washing programme and amount of laundry. After you switch Dose Assist function 03:15 , you can choose how heavily the laundry is soiled (3 possible levels).
  • Page 34: Cleaning And Maintenance

    CLEANING AND MAINTENANCE CLEANING THE FILTER The washing machine has a fi lter that will retain smaller objects such as coins, buttons, hair etc. Before cleaning, drain the water from the washing machine using the Drain program, and disconnect the washing machine from the power mains. Open the pump fi...
  • Page 35 CLEANING THE DETERGENT COMPARTMENT AND DOOR RUBBER GASKET Press the tab to completely remove the detergent compartment from its housing. Rinse and thoroughly clean the tray. You may also remove the cap from the plug in the conditioner compartment (A). Clean any residue from the cap and tube.
  • Page 36 CLEANING THE APPLIANCE EXTERIOR Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not use solvents or abrasive cleaners that could damage the appliance (please observe the recommendations and warnings provided by the manufacturers of the cleaning agents). Do not clean the washing machine with a jet of water! Always disconnect the washing machine from the power mains before cleaning.
  • Page 37 CLEANING THE RINSING HOLES (UNDER THE AGITATOR IN THE DRUM) If you believe that objects like nails or paper clips fell into the washing machine drum, check the area underneath the agitator. Such objects may rust (corrode) and cause stains on your clothes. Nails and other sharp objects can also cause holes in the fabric.
  • Page 38: Errors - What To Do

    ERRORS – WHAT TO DO? Disturbances from the environment (e.g. the power grid) may result in various error reports (see Troubleshooting table). In such case: • Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the washing program. •...
  • Page 39 Problem/error Cause What to do? There are traces • The laundry was very greasy. • Wash the laundry again. When your laundry is of grease (or this heavily soiled, add more washing powder or grease rolls) on the use a liquid detergent in combination with a more clothes.
  • Page 40 Manual opening of washing machine door Washing machine door may be opened manually if the appliance is not connected to the power mains and if the water has been pumped out of the machine. A Choose the Spinning or Drain program to pump the water from the machine. If this does not work, water has to be drained from the washing machine drum manually.
  • Page 41 FAILURE DISPLAY In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit. Press the INFO button to display the Error 3 Info Exit error description. Switch off the appliance and turn it back Errors indicated on the display unit may include the following: Error Error indication on the display...
  • Page 42 Error Error indication on the display What to do? unit DOOR UNLOCK ERROR Door is closed, but it cannot be unlocked. Turn off the Error while unlocking the door. washing machine, then turn it back on. If the error reoccurs, call a service technician.
  • Page 43: Service

    SERVICE BEFORE CALLING A SERVICE TECHNICIAN 1, 2, 3 When you contact a service centre, please state the model (1), type (2), and serial number (3) of your washing machine. Model, type, and serial number are indicated on the rating (type) plate located on the washing machine door casing.
  • Page 44: Technical Information

    TECHNICAL INFORMATION Information for test institute ENERGY LABELLING Australian standard AS/NZS 2040.1:2005 Washing program Normal, 40 °C, 8 kg cotton Connection Cold water 20 °C Test method for noise measurement IEC-60704-2-4 Power requirement when machine turned off < 0,3 W Power requirement for Delayed Start <...
  • Page 45 Loading procedure for standard test: Detergent, PBIS and Anti-Sudsing Agent (16ml) must be added via the detergent compartment. Loading procedure for standard test: When loading the machine for testing according to AS/NZS 2040:2005 it shall be loaded according to the table below.
  • Page 46 TECHNICAL INFORMATION Height 850 mm Width 595 mm Depth 585 mm Weight 76 / 76,5 kg (depending on the model) Drum volume 60 l Rated power See rating plate Heater power See rating plate Water pressure 0,1–1 MPa 1–10 kp/cm 10–100 N/cm Material for the drum and dispenser Stainless steel...
  • Page 47: Program Table

    PROGRAM TABLE Program Normal* 1600 60/56** 0,67/059** 3:54 Cotton 40/20 1600 1,30 2:59/1:33 Mix/Synthetics 1200 0,60 1:54 Wool/Hand 0,28 0:52 Dark wash 1200 0,53 1:15 Time program 1000 Auto 1600 Quick Cold 1600 0,50 0:30 Heavy 1600 2,00 2:46 Easy care 1200 0,65 1:57...
  • Page 48 Adjustment of the displayed washing time Advanced technology allows the appliance to sense the amount of laundry and add the required amount of water during the washing process. Depending on the washing load, washing time can be longer or shorter and the time displayed will be adjusted accordingly.
  • Page 49 TABLE: WASHING MODE/TEMPERATURE Washing mode Program Normal 20°C-90°C 30°C-90°C 40°C-90°C -90°C -90°C Cotton -90°C 20°C-90°C -90°C 40°C-90°C Mix/Synthetics 20°C-60°C 30°C-60°C 40°C-60°C -60°C -60°C Wool/Hand ,30°C-40°C ,30°C-40°C Dark wash 30°C-40°C 40°C ,30°C-40°C ,30°C-40°C Time program -60°C/ -90°C Auto -90°C Quick ,40°,60°,90°C Heavy 30°C-90°C -90°C...
  • Page 50: Option Table

    OPTION TABLE Options Program Normal 1600 Cotton 1600 Mix/Synthetics 1200 Wool/Hand Dark wash 1200 Time program 1000/1600 Auto 1600 Quick 1200/1600 Heavy 1600 Easy care 1200 Jeans 1200 Shirts program 1200 Steam Refresh Quick PRO 1200/1600 Hygiene 1600 Bedding 1600 Allergy cotton 1600 Allergy synthetics...
  • Page 51: Disposal

    DISPOSAL Disposal / recycling of packaging Our product packaging is made of environmentally friendly materials that can be recycled, disposed of, or destroyed without any hazard to the environment. To this end, packaging materials are labelled appropriately. The symbol on the product or its packaging indicates that the product should not be treated as normal household waste.
  • Page 52 NOTES...
  • Page 53 NOTES...
  • Page 54 NOTES...
  • Page 55: Quick Guide

    QUICK GUIDE SORT THE LAUNDRY. Close the zippers fasteners. Empty the pockets and turn them inside out. Check the laundry care symbols. Sort the laundry based on how heavily soiled it is, by colour, and by material. SWITCH ON THE MAIN ON/OFF SWITCH (ON/OFF) OPEN THE WASHING MACHINE DOOR AND INSERT THE LAUNDRY.
  • Page 56 WM75.1 AU/NZ en (10-22)

This manual is also suitable for:

W4086p.w.auW4086c.w.au

Table of Contents