Haier HTW5618ENMPUK User Manual page 36

EN
Problem
The interior
lighting or cooling
system does not
.
work
Water leaking
or dripping from
the water dis-
penser spout.
To contact the technical assistance, visit our website: https://corporate.haier-eu-
rope.com/en/
Under the section "website", choose the brand of your product and your country.
You will be redirected to the specific website where you can find the telephone
number and form to contact the technical assistance.
Power interruption
In the event of a power cut, food should remain safely cold for about 5 hours. Follow
these tips during a prolonged power interruption, especially in summer:
▶
Open the door/drawer as few times as possible.
▶
Do not put additional food into the appliance during a power interruption.
▶
If prior notice of a power interruption is given and the interruption duration is
longer than 5 hours, make some ice and put it in a container in the top of the
refrigerator compartment.
▶
An inspection of the goods is required immediately after the interruption.
▶
As temperature in the refrigerator will rise during a power interruption or other
failure, the storage period and edible quality of food will be reduced. Any food
that defrosts should be either consumed, or cooked and refrozen (where suit-
able) soon afterwards in order to prevent health risks.
Memory function during power interruption
After restoration of power the appliance continues with the settings that were set
before the power failure.
36
Troubleshooting
Possible Cause
• Mains plug is not connect-
ed in the mains socket.
• The power supply is not
intact.
• The LED-lamp is out of
order.
• The water tank is not
installed correctly
• The water dispenser spout
is not screwed tight to the
tank.
• The white silicon O ring
is missing from the water
spout.
Possible Solution
• Connect the mains plug.
• Check the electrical supply to
the room. Call the local elec-
tricity company!
• Please call the service for
changing the lamp.
• Refit the water tank into the
fridge door, ensure it is pushed
fully into the door.
• The water spout is screwed in
firmly to the water tank.
• Check the water spout has a
white silicon O ring at the tank
end before fitting the water
spout to the water tank.