Using The Battery - Epson Equity LT-386SX User Manual

Using the Battery

The battery pack that comes with the Equity LT-386SX
contains NiCad (nickel cadmium) batteries that power the
computer when the AC adapter is not connected. The battery
pack is rechargeable.
You need to recharge the battery pack at the following times:
time
flashing and you hear a beep.
After the Battery in Use icon starts to flash, you have a
maximum of 10 to 15 minutes before the battery charge is
completely gone. If you continue using the computer without
connecting the adapter, power runs out and you may lose data.
To recharge the battery, leave the battery pack connected to
the computer and connect the AC adapter to the battery pack.
Then connect the power cord to the AC adapter and to an
electrical outlet. You can charge the battery whether the
computer is on or off. For the maximum charge, leave the AC
adapter connected for eight hours or more. The battery pack
cannot be overcharged, so don't worry if you leave it connected
for more than eight hours.
2-2
Using the Equity LT-386SX