Installing The Internal Modem - Epson Equity LT-386SX User Manual

6. Tighten the retaining screws on the connector with a
screwdriver.
7. Plug the drive's power cable into an electrical outlet.
When you are ready to use the computer, turn on the external
diskette drive and then turn on the computer. Now run the
SETUP program, as described in Chapter 1.

Installing the Internal Modem

Follow these steps to install the optional, Epson internal modem
in your Equity LT-386SX.
1. Make sure the computer is turned off.
2. Press down on the release tab to lower the modem cover on
the back, left side of the computer (when the front of the
computer is facing you).
Installing Options
B-4