The Actionpoint Isn't Working Correctly - Epson ActionNote 910C User Manual

drivers supplied with your computer. If none
of these solutions solve your problem, contact
the card manufacturer or call your
Authorized EPSON Servicer or the EPSON
Connection for assistance.

The ActionPoint Isn't Working Correctly

Make sure the touchpad has not been
disabled in Setup. See "Changing the
Settings" in Chapter 6 for instructions.
If you use an external pointing device
connected to the mouse port, the
touchpad is automatically disabled. If you
want to use the touchpad, turn the
computer off and then on, and touch the
ActionPoint first.
Make sure the touchpad drivers are
loaded and the ActionPoint is configured
the way you want. See "Customizing Your
ActionPoint" in Chapter 6 for more
information.
If you install another pointing device and
then want to return to the ActionPoint,
you need to reinstall the ActionPoint
drivers. Type the following commands at
the MS-DOS prompt and then follow the
instructions on the screen:
7-14 Troubleshooting