Low Battery Protection; Replacing The Battery - Epson ActionNote 866C User Manual

Low Battery Protection

The ActionNote includes special power management features
that protect your data when your battery runs low. When you
have only a few minutes of power left, the Power indicator
light flashes and the computer beeps. At this point, you should
immediately save your data. To resume activity, you must
either turn off the computer and replace the battery (as
described below), or connect the AC adapter.
If the Low Battery option in Setup is set to Suspend, the
computer automatically enters Suspend mode when the battery
power reaches a critically low level. The contents of memory
are protected for several hours. If the Low Battery option is
set to Save to
on your hard disk drive, so they are always available. For more
information, see "Using Instant On and Saving to Disk."
If you are using Windows, you can select the Power icon in the
Control Panel to see a screen that displays your battery's status.
For more information about the power management features
available through Windows, see "Using the APM Interface"
later in this chapter.

Replacing the Battery

Follow these steps to replace the battery:
1. Complete your current activity and save your data.
2. Press the power button to turn off the computer.
3. Close the LCD screen and turn the computer over
, the memory contents are saved in a file
H D D
Powering the Computer 3-3