Using The Apm Interface - Epson ActionNote 650 User Manual

When your computer comes back on, you see this message:
Previous System State is being Restored;
Please Wait . . .
After a few moments, the data is restored to your computer's
memory and the screen returns to the state in which operations
were suspended.
Note
When you resume from Suspend to Disk mode, any
PCMCIA card and socket services that you loaded and
initialized before you suspended to disk are not reloaded or
reinitialized after you resume. Your computer may
recognize SRAM PC cards, but it will not recognize most
other PC cards. To reload and reinitialize these services, exit
any application programs you are using and exit Windows.
Then press Ctrl Alt Del to reboot your computer. Then select
the option to load your PCMCIA card drivers at the prompt.

Using the APM Interface

In addition to your computer's power management features,
your system supports the Intel/ Microsoft Advanced Power
Management (APM) interface, version 1.0 or higher. This
interface enhances your system's power-saving abilities by
providing increasing inactivity detection and lower CPU power
states without degrading performance.
APM is already enabled in the versions of MS-DOS and
Windows installed on your computer. MS-DOS provides APM
through the POWER. EXE utility. See your MS-DOS on-line
help utility for more inform ation about POWER.EXE.
Powering the Computer 3-15