How Do I Pre-Plan A Route By Search; How Do I Pre-Plan A Route Using The Map - Mio Combo 5207 LM Series User Manual

Item
Display area


How do I pre-plan a route by search?

1. From the Route planner panel, set your From and To points.
You can find a location by:
: Keyword
ƒ
: Address
ƒ
: Postcode
ƒ
Enter your text for search and click
from a category list to narrow your search results.
2. Complete the following:
If you want to
add a waypoint,
reset or remove a waypoint,
set the route preferences,
arrange the destinations in the most
efficient order while two or more
waypoints are included in the planned
trip,
3. Click Plan Route to calculate your route. The route will be displayed on the map.
4. Click Save this route. The route is saved to the Pre-planned Routes section and your
Mio simultaneously.

How do I pre-plan a route using the map?

1. From the map displayed in the display area, click
2. The cursor will be marked with "Add route." Move the cursor and then click on the
map to set the From point.
3. The cursor will be marked with "Click to set destination." You can:
60
Description
Display the route on the map.
You can also plan your route directly on the map.
...
to start a search. You may need to select
Then...
click Add Waypoint.
click next to the waypoint.
click Route option and select:
ƒ Mode: Select the desired mode to plan your route.
ƒ Type of route: Select the Fastest, Shortest, Easiest,
or Economical way to plan your route.
ƒ Avoidance: Avoid Unsurfaced roads, Toll roads,
Ferry routes, or Special zone in your route.
Note: The Route option settings will only apply to the route
you are editing.
click Waypoint Optimization.
.