Turning On And Off; Resetting The Device - Mio Combo 5207 LM Series User Manual

Turning on and off

Note: The battery may not be fully charged when you use your device for the first time.
ƒ For the initial start-up, press and hold the power button until the device turns on.
When you turn on your device for the first time, follow the prompts to customise your
device.
Note: The first time you use your Mio, it may take several minutes to establish a GPS
connection. When you have a GPS fix, you can start to use your Mio to plan your trip.
ƒ While the device is turned ON, press the power button and it will enter a suspended
state.
To resume using the device, do one of the following:
ƒ Press the power button briefly.
ƒ Connect the device to an external power source.
ƒ To turn OFF the device, press and hold the power button until the device shuts down.
CAUTION: When your Mio is turned on and connected to a computer, it is recognized as an
external mass-storage device. Do NOT delete any files that are pre-installed on your Mio.
Deleting the files can cause your Mio to crash.

Resetting the device

Occasionally, you may need to perform a hardware reset when your Mio stops responding;
or appears to be "frozen" or "locked-up." Insert a small rod, such as a straightened
paperclip (or the stylus that is attached to the back of the device holder), into the reset
button of your device.
11