Haier HWD1600 Service Manual page 23

Front load clothes washer & dryer combo

Hide thumbs Also See for HWD1600:

SERVICE MANUAL

HWD1600

Error message:

The water level sensor circuit short cut or open

Troubleshooting:

Check if

the wire of water levle sensor

is connected properly

Check if

the water levle sensor

is damaged

Replace PCB

Er12

Failure information: waterlevel abnormity during drying cycle

There are several reasons at it:

1. The drain pump is broken; 2.The connection between drain pump and the wire is abnormal; 3. The

amount of water flowing adapter is too much; 4.PCB is broken.

Er13

Failure information: Sheathed Heating Elements or drying

motor abnormity.

There are several reasons at it:

1. Thermal link is broken; 2.The connection between thermal link and wire is not suitable; 3. Sheathed

heating elements is broken; 4. The connection between sheathed heating elements and wire is not suitable;

5. Thermostat is broken; 6. The connection between thermostat and wire is not suitable; 7.PCB is broken.

All manuals and user guides at all-guides.com

Front Load Clothes Washer & Dryer Combo

Connect

well

Replace it

Table of Contents