Rails - Siemens CM724G1 2S Series User Manual And Installation Instructions

Table of Contents

Advertisement

7.
WARNING ‒ Risk of serious harm to health!
If the screws are undone, the safety of the appliance
can no longer be guaranteed. Microwave energy
may escape.
Never undo the screws.
Never unscrew the screws on the frame.
Clean the appliance door.
8.
→ "Suitable cleaning agents", Page 22
Dry the door panels and refit them.
9.
→ "Attaching the door outer pane", Page 25
10.
WARNING ‒ Risk of serious harm to health!
By removing and refitting the intermediate pane, the
safety of your appliance can no longer be guaran-
teed.
Never bend the bending tabs upwards.
Never remove the intermediate pane.
20  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
20.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards
1.
and detach it
⁠ .
19.2 Attaching the door outer pane
Attach the front pane downwards into the left- and
1.
right-hand retainers
Push the front panel in at the top.
2.
Push the front pane
3.
hear it click into place.
Screw both screws back in on the left and right of
4.
the appliance door.
Open the appliance door slightly and remove the
5.
tea towel.
Close the appliance door.
6.
Note: Do not use the cooking compartment again until
the door panes have been correctly fitted.
Swivel the entire rail outwards
2.
the rear
⁠ .
Clean the rail.
3.
Rails en
⁠ .
in at the bottom until you
and unhook it at
25

Advertisement

Table of Contents
loading

Table of Contents