Sony MSAC-US40 Operating Instructions Manual page 68

2
Insert the supplied CD-ROM (MSAC-US40) into the CD-ROM
drive on your computer.
The Installer launcher starts up automatically.
To install a driver, click the [Driver] button in the menu.
3
Carefully read the License Agreement, and then click the
[Agree] button.
When you click the [Agree] button, installation of the driver starts.
4
Click the [Next] button as prompted on the screen.
5
When you click [Finish], the driver installation is completed.
6
Following this, installation of the "Memory Stick Formatter"
starts.
Select the language on the [Choose Setup Language] screen, then click
the [Next] button.
Follow the instructions on the screen and click [Next].
7
When you click [Finish], installation of "Memory Stick
Formatter" is completed.
To use "Memory Stick Formatter," select [Start] – [Programs] –
[Memory Stick Utility] – [Memory Stick Formatter].
8
Following this, installation of the operating instructions (PDF
file) is performed automatically.
When installation of the operating instructions is completed, the
application selection screen returns.
To end installation of the software at this point, click [Exit].
If you do so, "SonicStage" is not installed.
To view the operating instructions, select [Start] – [Programs] – [Sony
Memory Stick Reader Writer] – [MSAC-US40 Instructions].
PNote
Adobe Reader from Adobe Systems Incorporated is required for
viewing the operating instructions (PDF file).
17-GB