Download Print this page

Kohler Underscore K-1822-GVB Manual page 2

5.5' vibracoustic bubblemassage bath

Advertisement

Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower, Amplifier:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Drop-in, Under-mount
Drain location:
End
Basin area, bottom:
44-1/2" x 22-5/16" (1130 mm x 567 mm)
Basin area, top:
59-5/8" x 25-1/2" (1514 mm x 648 mm)
Weight:
121 lbs (54.9 kg)
Minimum floor load:
56.7 lbs/ft² (276.8 kg/m²)
Water depth:
18" (457 mm)
Water capacity:
85.8 gal (324.8 L)
Cutout:
Drop-in, 64-1/2" x 30-1/2" (1638 mm x
775 mm)
Electrical component
Blower: 120 V, 10 A, 60 Hz, 300 W
rating:
Amplifier: 120 V, 1.1 A, 50/60 Hz
Amplifier channels:
2 at 15 W per channel
2 at 30 W per channel
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 06:08
5.5' VibrAcoustic BubbleMassage
1"
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
Control amplifier fits 16" (406 mm) center studs.
25' (7.6 m) cables are included.
Remote blower installation kit K-1446 is available
for relocating the blower. Provide access for
servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
Underscore
Bath
K-1822-GVB

Advertisement

loading