Download Print this page

Kohler Underscore K-1822-G Manual page 2

5.5' bubblemassage bath

Advertisement

Required Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower:
240 V, 15 A, 50/60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Drop-in, Under-mount
Drain location:
End
Basin area, bottom:
44-1/2" x 22-5/16" (1130 mm x 567 mm)
Basin area, top:
59-5/8" x 25-1/2" (1514 mm x 648 mm)
Weight:
111 lbs (50.3 kg)
Minimum floor load:
50 lbs/ft² (244.1 kg/m²)
Water depth:
18" (457 mm)
Water capacity:
85.8 gal (324.8 L)
Cutout:
Drop-in, 64-1/2" x 30-1/2" (1638 mm x
775 mm)
Electrical component
Blower: 240 V, 5 A, 50/60 Hz, 300 W
rating:
Minimum flat for door:
2-1/2" (64 mm)
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-7-2017 06:08
Underscore
5.5' BubbleMassage Bath
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
connected to the blower. Follow the blower
relocation instructions exactly. Provide access
for servicing the blower.
K-1822-G
1"

Advertisement

loading