Using Lgids And Gprobe - LG 60PX4DR Training Manual

SOFTWARE UPDATES

USING LGIDS AND GPROBE

1. On your desktop right click on My Computer or
access My Computer from the start menu.
2. Left click on Properties.
3. Left click on the Hardware tab.
4. Left click on (Device Manager...) Check the
Availability of Serial Port under "Ports" as
Communications Port (COM1) as shown in the
figure.
1. After downloading the program from GCSC. Install
\42PM1M-42PM3MV\GProbe5.1.0.18.exe
2. Run the EXE file and the install process will begin and an icon
will be placed on your desktop.
3. GProbe5 can be use by double clicking on the icon as shown in
the figure.
Opening GProbe will appear as below:
Plasma Training
80
Software Updates