Connecting To A Wlan And Configuring Network Settings; Connecting To A Wlan - Samsung ST200F User Manual

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1
On the Home screen, scroll to <Wi-Fi>.
2
Select , , ,
3
Press [ ], and then select Wi-Fi Setting.
• In some modes, press [
instructions until the Wi-Fi Setting screen appears.
• The camera automatically searches for available AP devices.
4
Select an AP.
Wi-Fi Setting
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Samsung 5
Select
Back
• Select WPS PBC to connect WPS AP.
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually.
•
, or .
] or follow the on-screen
Wireless network (ST200F/ST201F/ST205F only)
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [ ] to open AP setting options
When you select a secured AP, a pop-up window appears.
•
Enter the required passwords to connect to the WLAN. For
information about entering text, refer to "Entering text". (p. 106)
• When a login page appears, refer to "Using the login browser".
(p. 104)
• When you select an unsecured AP, the camera will connect to
the WLAN.
If you select a WPS profile supported AP, select WPS PIN,
•
and then enter a PIN on the AP device. You can also connect
to a WPS profile supported AP by selecting WPS PBC on the
camera, and then selecting WPS button on the AP device.
103