Table of Contents
Advertisement
Available languages
Available languages
1
Shock Protection Guard
2
Blade Receptacle
3
Blade Release Lever
4
Work Light
5
Switch Lock (GST18V-50 only)
6a
Variable Speed Trigger Switch
(GST18V-50 only)
6b
On/Off Switch (GST18V-50B only)
7
Variable Speed Dial
8
Battery Pack*
9
Battery Pack Release Button*
10
Handle (Insulated gripping surface)
Disconnect battery pack from tool or place the switch in the locked or off posi-
tion before making any assembly, adjustments or changing accessories. Such
preventive safety measures reduce the risk of starting the tool accidentally.
Inserting and Removing the
Battery Pack
Use only Bosch or AMPShare
batteries recommended in
the battery/charger list. Use of any other types
of batteries may result in personal injury or prop-
erty damage.
Ensure the switch is in the
off position before inserting
battery pack. Inserting the battery pack into
power tools that have the switch on invites ac-
cidents.
(Fig. 1, 2)
To insert the battery pack:
1. Set Switch Lock to the locked position
(GST18V-50 model only).
160992A88D GST18V-50 B 202302.indd 11
Getting to Know Your Product
Assembly
-11-
11
Allen Wrench and Storage Area
12
Footplate
13
Non-Marring Overshoe
14
Chip Blower Switch
15
Blade Orbit Selector Lever
16
Guide Roller
17
Blade
18
Anti-Splinter Insert
19
Dust Hood
20
Extraction Outlet
* Sold separately
Ensure on/off switch is set to the off position
prior to inserting battery pack (GST18V-50B
model only).
2. Slide charged Battery Pack 8 into the hous-
ing until the battery pack locks into position.
Your tool is equipped with a secondary locking
latch to prevent the battery pack from complete-
ly falling out of the handle, should it become
loose due to vibration.
To remove the battery pack:
1. Press the Battery Pack Release Button 9 and
slide the Battery Pack 8 from the housing.
2. Press the Battery Pack Release Button 9
again and slide the Battery Pack 8 complete-
ly out of tool housing.
2/14/23 10:53 AM
Advertisement
Table of Contents
