Table of Contents
Advertisement
en Familiarising yourself with your appliance
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→ "Display", Page 8
Buttons
2
You can use the buttons to directly set various
functions.
→ "Buttons", Page 8
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
→ "Basic operation", Page 13
Select the microwave operating mode
directly.
→ "Microwave", Page 15
Open the "Operating modes" menu.
→ "Operating modes", Page 9
Go back one setting.
Start or pause operation.
→ "Basic operation", Page 13
Select the timer.
→ "Setting the timer", Page 15
Press and hold for approx. 4 seconds
to activate the childproof lock.
→ "Childproof lock", Page 19
8
1
2
4.3 Display
The display is divided into different areas.
Digital setting ring
Use the digital setting ring on the outside of the display
to change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains in the display. If required, use
the setting ring to turn the value back again.
Status indicator
Status information is shown at the top of the display.
Symbol
Meaning
Timer is activated.
→ "Setting the timer", Page 15
Childproof lock is activated.
→ "Childproof lock", Page 19
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 20
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 20
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 20
Settings area
The settings area is in the centre of the display.
You can see current options and settings that have
already been made in the settings area.
The menu and other setting options are arranged hori-
zontally. Selection lists for functions are vertically ar-
ranged. Swipe over the display to scroll in the settings
area. To select a function, press the function on the dis-
play.
→ "Setting the operating mode", Page 13
Possible symbols in the settings area
Symbol
Meaning
Confirm the setting value.
Reset the setting value.
Change the setting value while the ap-
pliance is in operation.
Note: A blue marking "new" or a blue dot on a function
indicates that a new function, a new favourite or an up-
date was downloaded to your appliance using the
Home Connect app.
, there
, there
Advertisement
Table of Contents
