Advertisement
Quick Links
Service Manual
Washing Machine
Model: DWM-200C
Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
DAEWOO ELECTRONICS CORP.
http : //svc.dwe.co.kr
S/M No. : DW200C0001
Jul. 2004
Advertisement
Related Manuals for Daewoo DWM-200C
Summary of Contents for Daewoo DWM-200C
- Page 1 S/M No. : DW200C0001 Service Manual Washing Machine Model: DWM-200C Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).
-
Page 2: Table Of Contents
SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH TO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER SHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASHER AUTO WASH TO WASHER AUTO WASHER AUTO WASHER... -
Page 3: Specifications
1. SPECIFICATIONS ITEM SPECIFICATIONS 1 POWER VOLTAGE AC 110V AC 220V AC 127/220V AC 110/220V AC 220V AC 240V AC 127V SOURCE FREQUENCY 60Hz 50Hz 60Hz 2 POWER PUMP 610W 650W CONSUMPTION NON PUMP 580W 600W 3 DIMENSION NET : 924X542X1025, PACKED UP : 938X558X1040 (WXDXH) 4 MACHINE PUMP NET : 39kg, PACKED UP : 42.5kg... -
Page 4: External View
2. EXTERNAL VIEW Structure Of The Washing Machine Control Panel (Panel b Ass’y) 1 WASH TIMER 5 VALVE SELECTOR Use to select the desired time for washing or rins- Select “WASH, RINSE” for washing and rinsing, and ing. “DRAIN” to drain the water. (In case PUMP MODEL turn on the drain pump) 2 WASH ACTION “OFF”... -
Page 5: Principles Of Operation And Explanation Of Functions
3. PRINCIPLES OF OPERATION AND EXPLANATION OF FUNCTIONS Wash Timer WORK PRINCIPLE INSTRUCTION I. Time part 1. The extro force will make 7(main shaft), 4, 6(cam) and 37(first cam) rotate clockwise to a certain angle, then 43(spring) transmogrify and accumulate power, the both sides of 48, 49(reed) be contacted, move limitation of 8(sway slice) was released. - Page 6 Spin Timer FUNCTION The spin timer is the switch providing power to the SPIN MOTOR(DRAIN PUMP MOTOR) during the set spin dry time, and is a spring-type time switch comes on turning and those contact points comes off after the set time. STRUCTURE AND PRINCIPLE OF ACTIVATION 1) The main shaft turns due to the unwinding force when the spin timer is turned, the spring wound with that force being delivered through each gear and the spring slowly unwinding at a speed finally controlled by the angle...
- Page 7 BRAKE SYSTEM When the DOOR SPIN is opened, LINK BRAKE which con- nect to DOOR SPIN loosens. And then the BRAKE BAND touches the DRUM COUPLING assembly and stops the BAS- KET SPIN as it is pulled by the SPRING in the BRAKE FIX PLATE assembly.
- Page 8 GEAR HOUSING ASS’Y The GRAR HOUSING ASSEMBLY is a transmission device which turns the PULSATOR at 6:1 lowered speed through the gear unit assembly which receives power at the GEAR SHAFT UNIT. STRUCTURE 1) The two sides of the GEAR SHAFT UNIT are supported by the OILLESS BEARING in the GEAR HOUSING ASSEMBLY.
-
Page 9: Direction For Disassembly And Assembly
4. DIRECTION FOR DISASSEMBLY AND ASSEMBLY Ass’y Panel Back 1. Remove 3 screws on the PANEL B. 2. Remove KNOB, wash timer and spin timer on the PANEL B. 3. Remove 5 screws and CONTROL LEVER Basket Spin 4. Remove 4 screws on the COVER BACK. 5. - Page 10 6. Remove bolt and nut on the upper side of the 7. Remove the PLATE T on the TUB. DRUM COUPLING AS. 8. Lift up the BASKET SPIN. Ass’y Base Under 9. Remove 1 screw on the CABINET. 10. Separate HARNESS AS connectors.
- Page 11 11. Remove a V-BELT from PULLEY MOTOR. 12. Turn over the washing machine. 13. Remove 7 screws on the BASE UNDER ASSY. 14. Remove 3 screws on the BRACKET MOTOR, and remove the SPIN MOTOR. 15. Remove 3 bolts on the BASE UNDER, and 16.
-
Page 12: Troubleshooting Guide
5. TROUBLESHOOTING GUIDE NOTES Pull out the power plug to repair and make sure that the Washing Machine has been properly grounded. Concerning Wash PROBLEM CHECK POINT CAUSE SOLUTION Is the Power properly connected? Reconnect the Power Cord. Is there a whirring sound from the Wash Motor when turned on? Reconnect the Condenser. - Page 13 PROBLEM CHECK POINT CAUSE SOLUTION Does the Gear Housing Shaft Worn out the Serration Replace Pulsator. Pulsator rotate properly when the Pulsator within the Pulsator. does not has been disassembled? rotate smoothly. Defective Gear Housing Replace Gear Housing As. Improper Connection Reconnect Is the wiring of Wash condenser properly connected?
- Page 14 PROBLEM CHECK POINT CAUSE SOLUTION Brake wire is too long. The Brake Band is touching Assemble after loosening the Drum Coupling Assembly. LINK BRAKE and adjusting downward. BRAKE SPRING is broken. Replace Brake Spring. Is the Motor hot? (In case there is Power has been cut off by Power restored when motor Thermal Protector)
- Page 15 PROBLEM CHECK POINT CAUSE SOLUTION Is the Bellows Assembly properly Waterproofing not working Re-assemble assembled? due to defective assembly. Bellows Assembly. There is leak- age during Replace Bellows The Waterseal or the spinning. Assembly. Oilless Metal in the Bellows Assembly is worn out. Brake wire is too short.
- Page 16 PROBLEM CHECK POINT CAUSE SOLUTION Is the Drain Selector in the DRAIN Turn the Drain Selector to The position is fault. position DRAIN. Draining does not function dur- Defective wiring Reconnect wiring ing drain Is the pump Motor wiring properly selecting connected? Defective Pump motor...
-
Page 17: Exploded View And Parts List
6. EXPLODE VIEW AND PARTS LIST Ass’y Panel Back... - Page 18 Caution In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y panel PART NAME PART CORD SPECIFICATION...
- Page 19 Ass’y Tub...
- Page 20 Caution In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y tub PART NAME PART CORD SPECIFICATION...
- Page 21 Ass’y Main...
- Page 22 So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). ass’y main PART NAME PART CORD SPECIFICATION Q’TY REMARKS ASSY CABINET PRCACA8100 DWM-200C PLATE UPPER 3614525100 SGCC 0.6T SCREW TAPPING 7122401011 T2S TRS 4*10 MFZN COVER BACK 3611419800 SECC 0.4T...
- Page 23 PART NAME PART CORD SPECIFICATION Q’TY REMARKS COUPLING DRUM AS 3617001700 DWM-160C DRUM COUPLING BOLT 3619401601 8X13 BOLT, SILOCK COATING SPECIAL BOLT AS 3616008000 6B-1-M8X12 BRAKE FIX PLT AS 4505C54000 2-WAY BOLT HEX 7341500811 6B-1-5X8 MFZN SPRING BRAKE 4507K53010 SWC D1.0 ZN8-C ASS'Y BRAKE WIRE 3619201702 SUS WIRE+PE L260...
-
Page 24: Wiring Diagram
7. WIRING DIAGRAM Single Voltage/Normal SAFETY S/ W WASH TIMER SPIN TIMER SPIN UNIT WASH BK(BR) MOTOR CAPACITOR MOTOR GN(GN/YW) WH(BL) GN(GN/YW) (EARTH) BK:BLACK VT:VIOLET RATING 120~ 220~ VOLTAGE(V~) BL:BLUE BR:BROWN RD:RED YW:YELLOW 50/60 PK:PINK GN:GREEN 45.6 41.6 10.4/9.7 10.4/9.7 WH:WHITE GN/YW:GREEN/YELLOW CAPACITOR... - Page 25 Dual Voltage/Normal CAUTION TIMER SPIN SAFETY S/W CONNECTOR PLUG TIMER WASH CONNECTOR SW VOLTAGE CHANGE 220V C SW VOLTAGE CHANGE 110V or 127V D C V~ D V~ FUSE 250V/6A OPTIMUM USE WITH YOUR VOLTAGE. THIS UNIT IS SET FOR IF YOU WANT TO CHANGE VOLTAGE THE C V ~ CONNECTOR PLUG BK(BR)
- Page 26 DAEWOO ELECTRONICS CORP. 686, AHYEON-DONG MAPO-GU SEOUL, KOREA C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” PRINTED DATE: Jul. 2004 S/M No. : DW200C0001...