Table of Contents
Advertisement
Specific safety instructions
2.1
General overview
Note
Siemens AG does not accept any liability for damage and failures that result from the non-
observance of these operating instructions.
Note
European RoHS directive
SIMOGEAR geared motors comply with the stipulations laid down in Directive 2011/65/EU.
These operating instructions are part of the gearbox delivery. Store the operating instructions
near the gearbox. Please read the operating instructions prior to handling the gearbox and
observe the information they contain. This is the best way of ensuring safe and trouble-free
operation.
The operating instructions supplement the SIMOGEAR gearbox operating instructions
BA 2030 (2KJ4).
These operating instructions apply to the adapters of the standard SIMOGEAR gearbox
version:
• Adapter KS - coupling adapter only for fitting a SIEMENS servomotor of the
SIMOTICS S-1FK7/1FT7, SIMOTICS M-1PH8, SIMOTICS S-1FK2, SIMOTICS S-1FL6,
SIMOTICS M-1PH1, and SIMOTICS M-1PH3 series
• Adapter K2 - adapter with flexible coupling for fitting an IEC motor
• Adapter K4 - short adapter with plug-in parts for fitting an IEC motor
• Adapter K8 - coupling adapter for fitting a servomotor of the
SIMOTICS M-1PH8 series
• Adapter A, AZ - adapter with free drive shaft
Table 2- 1
SIMOGEAR adapter
Adapter KS for mounting a SIEMENS servomotor
Adapter K2 for fitting an IEC motor
Short adapter K4 for fitting an IEC motor
Adapter K8 for fitting a servomotor
Adapter A
Adapter AZ
Example of an article number code for a SIMOGEAR gearbox with coupling adapter KS
2KJ4xxx-xxA01-xxxx.
BA 2039 (2KJ4)
Operating Instructions, 12/2022, A5E50009089A/RS-AJ
Article number code
Article number position
12
1
2
4
8
9
9
2
Supplement
-
-
-
-
M1A
M1B
17
Advertisement
Table of Contents
