Server Chassis Features - Supero SuperWorkstation 7045A-8 User Manual

PCI Expansion Slots
The X7DAE/X7DA8 has seven PCI expansion slots, which includes two x16 PCI-
Express slots (supports SLI), one x4 PCI-Express slot (in a x16 slot), three 64-bit
PCI-X slots (which includes two 133/100 MHz slots and one 100 MHz ZCR slot)
and one 32-bit 33 MHz PCI slot.
Onboard Controllers/Ports
One fl oppy drive controller and two onboard ATA/100 controllers are provided to
support up to four hard drives or ATAPI devices. The color-coded I/O ports include
two COM ports, a parallel port, four USB 2.0 ports, PS/2 mouse and keyboard ports
and Line-In, Line-Out and Mic jacks. Two front side USB ports are also included on
the front of the chassis. The X7DAE/X7DA8 has two gigabit Ethernet ports.
Other Features
Other onboard features that promote system health include onboard voltage moni-
tors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU
overheat sensors, virus protection and BIOS rescue.
1-3

Server Chassis Features

The SuperWorkstation 7045A-T/7045A-8 is a scaleable server platform designed
with today's most state-of-the-art features. The following is a general outline of the
main features of the SC743TQ-645/SC743S1-645 server chassis.
System Power
The 7045A-T/7045A-8 features a single 645W power supply. This power supply
unit has been designed to operate at a low noise level to make it ideal for use in
a workstation environment.
SATA Subsystem (7045A-T)
For the 7045A-T, the SC743TQ-645 chassis was designed to support six Serial
ATA hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Chapter 1: Introduction
1-3