Daikin FTKB25WAVMV Operation Manual page 25

Case
„ The unit does not receive
signals from remote
controller or has a limited
operating range.
„ Other electronic devices
start operating.
The flap does not start
swinging immediately.
The ON/OFF TIMER does not
operate according to the
settings.
A sound is heard.
„ A sound like a flow of water
„ Ticking sound
„ Clicking sound during
operation or idle time
„ Clopping sound
Air does not come out.
The air conditioner continues
operating even after COOL or
DRY operation is stopped.
• Signal communication may be disabled if an electronic-
starter-type fluorescent lamp (such as inverter-type lamps) is
in the room. Consult your dealer if that is in this case.
• The remote controller may not function correctly if the
transmitter is exposed to direct sunlight.
• If the remote controller activates other electronic devices,
move them away or consult your dealer.
• The air conditioner is adjusting the flap position.
• The flap will start moving soon.
• Check if the ON/OFF TIMER correct. The actual length of
timer can be differ from user setted time for approx.
10 minutes.
• This sound is generated because the refrigerant in the air
conditioner is flowing.
• This is a pumping sound of the water in the air conditioner
and heard when the water is pumped out from the air
conditioner in cooling or drying operation.
• The refrigerant flows in the air conditioner even if the air
conditioner is not working when the indoor units in other
rooms are in operation.
• This sound is generated when the size of the air conditioner
slightly expands or shrinks as a result of temperature
changes.
• This sound is generated when the refrigerant control valves
or the electrical parts operate.
• This sound is heard from the inside of the air conditioner
when the exhaust fan is activated while the room doors are
closed. Open the window or turn off the exhaust fan.
„ In COOL or DRY mode
• If COOL/DRY operation is started with airflow settings on
"AUTO", the indoor unit will initially deodorise, which functions
to suppress any internal odours. As a result, the indoor unit
will not emit air immediately. (Wait for about 1 minute.)
• The air conditioner is operating in MOLD PROOF mode.
When you want to stop MOLD PROOF operation midway,
press .
Page 14
TROUBLESHOOTING
Explanation
23