Remington R27A Use And Care Manual page 17

**Trimmer: Lubricate teeth with oil every
six months.
1. Unplug the shaver.
2. Run shaver until motor stops.
3. Remove head from shaver (Press
release button and pull head straight
away from shaver body).
4. Unscrew the screw located on the
hair pocket assembly, and remove the
assembly.
5. Unscrew the two screws located on the
inner housing (black).
6. Using a small screwdriver pry front
cover from shaver body.
7. Remove four screws located on front of
shaver.
8. Remove rear cover from inner housing
to expose batteries.
Battery Recycle
9. Pry batteries free from circuit board
10. Dispose of batteries properly.
NOTE: Always recycle or properly
dispose of batteries according to
Local and State requirements.
CAUTION: THESE NiMH BATTERIES
MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH STATE AND
LOCAL REGULATIONS.
Do not burn or mutilate, as they may
burst or release toxic materials. Do not
short-circuit, as this may cause burns.
and cut wires.
17