Table of Contents
Advertisement
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heat up function cannot be started.
Set the type of heating and temperature.
1.
Press the c button.
2.
The c symbol appears on the left next to the
temperature. The progress line begins to move across.
When rapid heat up is complete, a signal sounds. The
c symbol goes out. Place your dish in the cooking
compartment.
Notes
If a cooking time has been set, this runs
■
independently of the rapid heat up process and
counts down immediately when operation is started.
You can use the l button to check the current
■
cooking compartment temperature during rapid heat
up.
Cancelling
Press the c button. The c symbol disappears from
the display.
OTime-setting options
Your appliance has different time-setting options.
i o n s
T i m e - s e t t i n g o p t
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End
Set a cooking time and an end time. The
*
appliance switches on automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time of over one hour can be set in 5-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds.
Using the l button, you can request information
■
during operation, which then appears briefly in the
display.
Timer
You can set the timer at any time, even if the appliance
is switched off. It runs parallel to the other time settings
and has a separate audible signal. In this way, you can
tell whether it is the timer or a cooking time which has
elapsed.
The maximum setting you can apply is 24 hours.
Press the 0 button.
1.
The field for the timer opens.
Use the rotary selector to set the timer duration.
2.
The timer starts after a few seconds.
The U symbol for the timer and the time counting down
are displayed on the left in the status bar.
When the time has elapsed
An audible signal sounds. "Timer elapsed" appears in
the display. Use the 0 button to cancel the audible
signal early.
Cancelling the timer duration
Press the 0 button to open the time-setting options
menu and turn the time back. Press the 0button to
close the menu.
Changing the timer duration
Use the 0 button to open the time-setting options menu
and change the timer time in the next few seconds
using the rotary selector. Start the timer with the
0 button.
Cooking time
If you set the cooking time for your food, operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
Press the 0 button.
1.
The time-setting options menu opens.
Set the cooking time using the rotary selector.
2.
Press the Start/Stop button to start.
3.
You can see the cooking time xcounting down in
the status bar.
Time-setting options
en
13
Advertisement
Table of Contents
