Linksys EA4500 V3 Manual page 7


INTERNET port — Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband Internet cable/DSL or fiber modem.
NOTE For best performance, use CAT5E or higher rated cables on the Ethernet ports.

Wi-Fi Protected Setup™ button — Press to configure wireless security on Wi-Fi Protected Setup-enabled network devices.


USB 2.0 port — Connect and share USB drives on your network or on the Internet.Reset button — Press and hold for 10 seconds (until the power LED
starts flashing) to reset the router to factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the Internet or mobile app.
 Power port — Connect the included AC power adapter.
 Power switch — Press to turn on the router (European only).
Top view