Sylvania HT6051F Service Manual page 17

When a disc cannot be ejected by method 1, follow the procedure below and remove the Chassis Cover.
< Method 3 >
1. Remove the Top Cover, the Bottom Cover, the
Front Assembly, the Reinforce Plate and the Front
Bracket.
2. To remove the Chassis Cover, remove 4 Screws A
as shown in Fig. D6.
3. Remove a disc.
Screws A
Disc
Reassembly note of the Chassis Cover:
1. Insert the pin A on the Chassis Cover into the hole
A on the Main Chassis as shown in Fig. D7.
Pin A
Hole A
2. Tighten 4 Screws A as shown in Fig. D6.
Screws A
Chassis
Cover
Fig. D6
Chassis Cover
Main Chassis
Fig. D7
1-5-6 E61TADC