Cleaningtheshaver
1
1
Inserttheapplianceplug.
2
2
Plugintheadaptor.
•
Remove any soap or water on the shaver if
it has been washed with hand soap or any
other detergent.
3
3
Removetheprotectivecap
andthenattachtheshaver.
•
Turn the shaver off before attaching.
•
Check that the outer foil is not deformed or
damaged when you are attaching the
shaver.
4
4
Press[SELECT]toselectthe
course.
•
The "Charge" course starts when attaching
the shaver.
•
Each time you press [SELECT], the course
changes from "Clean/Dry/Charge"
Charge"
"Charge".
•
The courses start approximately 6 seconds after they are
selected.
•
The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
•
Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
ES-LA93_CIS.indb
7
2
Charge
1
Clean/Dry/
3
Dry/Charge
"Dry/
Course
Course
selection
indications
Charge
Timerequired(guide)
[Inthelow
temperature]
Charge (0 to 60 min)
Clean (10 min)
Dry (80 min [170 min])
Charge (0 to 60 min)
Dry (180 min)
Charge (0 to 60 min)
7
2010/01/06
16:44:50