Panasonic ES-LA93 Operating Instructions Manual page 4

while until it glows.
•
Depending on the environment, the shaver may not dry even if
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
Chargingwiththeself-cleaning
recharger
Thoroughly wipe off any drops of water on or around the recharger
so that it is dry before charging it.
2
1
1
1
Inserttheapplianceplug.
2
2
Plugintheadaptor.
3
3
Removetheprotectivecapandthenattachthe
shaver.
•
Turn the shaver off before attaching.
•
Check that the outer foil is not deformed or damaged when you
are attaching the shaver.
•
The indicators on the LCD panel glow and charging starts.
•
Charging is completed when the indicators on the LCD panel
blink.
(Max. 1 hour later)
•
You can keep the shaver attached to the recharger, or connected

ES-LA93_CIS.indb 4
3
to the adaptor, when not using it to maintain full battery capacity.
You cannot overcharge the shaver.
Chargingwithouttheself-cleaningrecharger
You can also charge without the recharger.
1. Insert the appliance plug into the shaver.
. Plug in the adaptor into a household outlet.
You cannot operate the shaver while charging.
2010/01/06 16:44:49