DeWalt D25899 Manual page 28

english
re-bar may be hazardous as well. Tighten the
side handle securely before use.
• Ensure the chisel is secured in place before
operating the tool.
• In cold-weather conditions or when the tool
has not been used for a longer period of time,
let the tool run with no load for several minutes
before use.
• When working above ground level ensure the
area below is clear.
• Do not touch the chisel or the parts close to the
chisel immediately after operation, as they may
be extremely hot and cause burns to the skin.
• Always direct the power cable to the rear, away
from the chisel.
• Do not operate this tool for long periods of
time. Vibration caused by hammer action may
be harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.
WARNING: We recommend the use of
a residual current device with a residual
current rating of 30mA or less.
Residual Risks
The following risks are inherent to the use of
demolition hammers:
– Injuries caused by touching the hot parts of
the tool.
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing
the accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/
or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
Wear ear protection.
Wear eye protection.
26
DATE CODE POSITION (FIG. 1)
The Date Code (q), which also includes the year of
manufacture, is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Demolition hammer
1 Side handle
1 Pointed chisel (D25941)
1 Kitbox
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred
during transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fig. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. On/off switch
b. Main handle
c. Side handle
d. Chisel position index collar
e. Tool holder/sleeve
INTENDED USE
The D25899 and D25941 heavy-duty demolition
hammers are designed for heavy-duty demolition,
chipping and chasing applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These heavy-duty demolition hammers are
professional power tools. DO NOT let children come
into contact with the tool. Supervision is required
when inexperienced operators use this tool.
• Young children and the infirm. This appliance
is not intended for use by young children or
infirm persons without supervision.
• This product is not intended for use by persons
(including children) suffering from diminished
physical, sensory or mental abilities; lack of
experience, knowledge or skills unless they are
supervised by a person responsible for their
safety. Children should never be left alone with
this product.