Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt D25899K
Summary of Contents for DeWalt D25899K
- Page 1 D25899 D25941...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Figure 1 D25899 D25941...
- Page 4 Figure 3 Figure 2 D25899 Figure 4 D25899...
- Page 5 Figure 5 D25941 Figure 6 19 mm D25941...
- Page 6 Figure 7 Figure 8...
- Page 7 Figure 9...
-
Page 8: Technical Data
English (original instructions) English DEMOLITION HAMMER D25899, D25941 Congratulations! You have chosen a D WALT power tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data D25899 D25941 Voltage... -
Page 9: Ec Declaration Of Conformity
English avoided, could result in death or WARNING: To reduce the risk of injury, serious injury. read the instruction manual. CAUTION: Indicates a potentially General Power Tool Safety Warnings hazardous situation which, if not avoided, may result in minor or WARNING! Read all safety warnings moderate injury. - Page 10 English 3) PERSONAL SAFETY measures reduce the risk of starting the Stay alert, watch what you are doing and power tool accidentally. use common sense when operating a Store idle power tools out of the reach power tool. Do not use a power tool while of children and do not allow persons you are tired or under the influence of unfamiliar with the power tool or these...
-
Page 11: Residual Risks
English re-bar may be hazardous as well. Tighten the DATE CODE POSITION (FIG. 1) side handle securely before use. The Date Code (q), which also includes the year of • Ensure the chisel is secured in place before manufacture, is printed into the housing. operating the tool. -
Page 12: Electrical Safety
English Soft Start Feature conductor size is 1.5 mm ; the maximum length is 30 m. D25941 When using a cable reel, always unwind the The soft start feature allows the impact rate to build cable completely. up more slowly, thus preventing the chisel or point ASSEMBLY AND ADJUSTMENT from “bouncing”... -
Page 13: Operation
English 1. Clean the chisel shank. • Be aware of the location of pipework and wiring. WARNING: Do not apply lubricant to the machine. • Apply a pressure of approx. 20–30 kg to the tool. Excessive force does not 2. Pull back the tool holder/sleeve (e), align the speed up chiselling but decreases tool groove (g) with the yellow marker (h) and insert performance and may shorten tool life. -
Page 14: Maintenance
English MAINTENANCE Your D WALT power tool has been designed to operate over a long period of time with a minimum Cleaning of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning WARNING: Blow dirt and dust out of WARNING: To reduce the risk of the main housing with dry air as often injury, turn unit off and disconnect... - Page 15 English WALT provides a facility for the collection and recycling of D WALT products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
- Page 16 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)