Samsung NQ70 700D Series Installation Manual page 12

Installation instructions
3-Wire Cable from Home Power Supply - U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply where local codes
permit a 3-wire connection.
A
B
C
D
E
F
A. Cable from home power
supply
B. Junction box
C. Black wires (normally L1)
D. White wires (normally
N-neutral)
E. green wires (normally
G-ground)
4-wire flexible conduit from
F.
oven
Red wires (normally L2)
G.
H. UL listed wire connectors
I. UL listed or CSA approved
conduit connector
12 English
DG68-01560A-00_IM_NQ70xx700D,600DxxAA_EN+MES+CFR.indb 12 DG68-01560A-00_IM_NQ70xx700D,600DxxAA_EN+MES+CFR.indb 12
1. Connect the 2 black wires (C) together
using a UL listed wire connector.
2. Connect the 2 white wires (D) and
G
the green (or bare) ground wire (of
H
the oven cable) using a UL listed wire
connector.
3. Connect the 2 red wires (G) together
using a UL listed wire connector.
I
4. Install junction box cover.
Install oven
1.
Carefully push against front oven frame.
Handle Handle
2.
Only push the lower oven. Do not push the
upper oven. (To prevent radio frequency
leakage.)
Using 2 or more people, lift the oven
partially into the cabinet cutout. Use
the handle as shown below.
NOTE
Push against the seal area of the front
frame to push the oven into the cabinet
until the back surface of the front frame
touches the front wall of the cabinet.
CAUTION
2023-04-04 오전 11:45:34 2023-04-04 오전 11:45:34