WAGNER 700 Manual page 11

Translation from original manual
Manufacturer:
Wagner GmbH
Hauptstraße 57
D-66919 Hermersberg
Dear client,
We hope you enjoy your new firewood circular saw and wish you success with it.
INFORMATION:
The manufacturer of this tool is, according to the current product liability law, not liable for damages caused to or by this tool
because of:
•incorrect usage,
•failure to observe the manual,
•repairs by third parties, not authorized specialists,
•fitting and exchange of non-original exchange parts,
•non-intended use,
•falling out of the electrical installations because of inobservance of the electrical Rules and VDE-Regulations 0100, DIN
57113/VDE0113.
We recommend that you:
Read the entire operating instructions before assembling and implementing.
This instruction manual should make it easier for you to get to know your machine and to use its range of applications as
intended. The manual contains important information on how to work with the machine in a secure, correct and efficient
way, and how you can avoid risks, save repair costs, reduce down time and increase the reliability and life span of the
machine. Apart from the safety rules mentioned in these operating instructions, you should implicitly pay attention to the
valid regulations of your country for the use of the machine. Keep the manual, in a plastic cover protected against dirt and
humidity, with the machine. They should be read and observed carefully by every member of staff before starting to work.
Only people instructed on how to use the machine and informed about the possible risks, should be allowed to use it. The
required minimum age is to be adhered to. Besides the safety instructions in this manual and the special regulations of your
country the recognized technical rules for the operation of wood processing machines need to be observed.
Contents
GENERAL INFORMATION
INTENDED USE
OTHER RISKS
SCOPE OF DELIVERY
TECHNICAL INFORMATION
ASSEMBLY
TO SET UP AND ADJUST
TRANSPORT OF THE MACHINE
ROCKER LOCK
ELECTRICAL CONNECTION
CIRCUIT DIAGRAM
IMPLEMENTING
MAINTENANCE
TROUBLESHOOTING
EG-CONFORMITY STATEMENT
WARRANTY
SPARE PARTS LIST
12
12
12
12
13
13
13
14
14
14
16
16
16
16
17
17
20
Seite:11