Stealth Cam STC-WD3 User Manual page 41

•
Adjust the solar panel's receiving side toward the sufficient sun
light direction.
•
Insert the solar panel's plug into the solar jack of the bottom of
camera housing
•
Slide the power source switch to SOLAR position to start the
charging.
When use the rechargeable battery connecting to solar
panel, please always make sure the camera power source
switch is on SOLAR position.
Also make sure to install the rechargeable in correct
polarity (+/-). Incorrect voltage or polarity (+/-) will damage
the camera.
•
For first time use, please leave the solar panel with camera
power switch turned in OFF position for full daylight charging at
least 20 hours.
www.stealthcam.net
STC-WD3
Toll Free 877-269-8490 41