Stealth Cam STC-WD2 User Manual page 26

clips will only turn out well in good daytime lighting
conditions. If the lighting conditions are not enough, unit
will switch the AVI to single image capturing automatically.
When using the AVI function, the camera cannot use the
flash. Time/Date stamp will not appear on the AVI video
clips.
Viewing and deleting the images
The STC-WD2 cam offers the user three different options for
viewing the images. The external LCD display screen on the front
housing will show the number of images in memory.
To wake the camera from PIR detection mode press and hold
either the [UP] or [DN] button for about 5 seconds.
The instructions below are based on starting from a camera that
is turned off.
Viewing the image on a handheld LCD TV video monitor (cable
included)
www.stealthcam.net
STC-WD2
Toll Free 877-269-8490 26