Stealth Cam STC-WD2 User Manual page 19

•
Press [OK] to confirm and exit to RESOLUTION setting
•
If you choose Delete One or Delete All, you will remain in this
mode until you press [DN] button to move the selection to No
Delete then press [OK] to exit to Resolution setting.
•
Press [MENU] to exit to power on status.
Once all settings have been completed press the [MENU] button
to return to CAMERA STATUS screen.
At the end of each program set up selection, you may press
[MENU] to exit and return to camera status ready for the 1
minute count down mode to enter PIR capturing.
www.stealthcam.net
STC-WD2
Toll Free 877-269-8490 19