Stealth Cam STC-ADX User Manual page 16

Programming the Stealth Cam STC-ADX / STC-ADXRT
Slide the power switch to TEST position. You will hear one beep and
the Stealth Cam Logo will show on the LCD screen for about one
second. Once you hear the second beep, you can press the MENU
button to start your programming.
You will see the programming screen as follows:
Manual Capture Mode
To set manual capture mode
Press UP or DOWN button to highlight
Manual Capture Mode.
Press LEFT or RIGHT button to select between Normal Camera
capture mode or Movie capture mode.
Press OK to confirm your setting
Press Menu to exit setting (see page 30 for manual mode
operating instruction)
www.stealthcam.net
STC-ADX / STC-ADXRT
Toll Free 877-269-8490
16