Table of Contents
Advertisement
en Home Connect
15.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
Remote Start is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The refresher tank is not empty.
Press
Remote Start .
▶
Remote Start lights up and the
a
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press
Remote Start .
▶
Remote Start goes out.
a
15.8 Intelligent programme
recommendation
After you have washed your laundry
in the washing machine, the dryer will
recommend a suitable programme
for drying your laundry.
To determine the best drying
programme to use, your appliances
must transmit and receive
information. Observe the following:
¡ The washing machine must be an
appliance with the Home Connect
function.
42
¡ The washing machine and dryer
must be connected to your home
network and registered in your
Home Connect app.
Using the intelligent programme
recommendation
Press
SmartDry .
1.
a The appliance detects a suitable
programme. To cancel or change
the programme recommendation,
set a different programme or
switch the appliance to standby
mode.
a If the appliance finds a suitable
programme, the display for the
programme lights up and the pro-
gramme information is displayed.
a If the appliance does not find a
suitable programme, a signal
sounds and the display shows "-
--" .
Press
.
2.
Note
Why is my dryer unable to
recommend a programme?
¡ No suitable drying programmes for
the selected washing programme
on the dryer.
¡ No data is available for the last
washing programme used. The
data is stored for 24 hours and
then deleted.
¡ The washing programme has been
cancelled. The washing pro-
gramme must run through to the
end for analysis to be possible.
15.9 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
Advertisement
Table of Contents
