Table of Contents
Advertisement
(Warning indicator pertaining to the
external media device)
The image database file may be damaged.
Check the database file by touching
[Rec/Media SET] [Repair Img. DB F.]
the recording medium.
The external media device is damaged.
(Warning indicator pertaining to
formatting of the external media device)
The external media device is damaged.
The external media device is not formatted
correctly.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steadily
with both hands and record the image.
However, note that the camera-shake warning
indicator does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
Rec Format] is set to [1080/60p
], [1080/60i
] or [720/60p
cannot capture photos while recording movies.
Furthermore, if [
[1080/30p
], [1080/30p
or [1080/24p
], you cannot record photos
while the camcorder is in movie recording
standby mode.
], you
Rec Format] is set to
], [1080/24p
]
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the
camcorder is set differently from the default
format. Performing [Format] (p. 78) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.
Data error.
An error occurred during reading or writing
the internal recording media of the camcorder.
If the message is preceded by a GPS indicator,
there may be some trouble with the GPS
receiver. Turn on your camcorder again.
This may occur when you keep applying shock
on the camcorder.
Movies recorded on other devices may not be
played back.
The Image Database File is damaged. Do
you want to create a new file?
HD movie management information is
damaged. Create new information?
The management file is damaged. When you
select
, a new management file is created.
There is no Image Database File Movies
cannot be recorded or played Create a
new file?
You cannot record or play back movies
because no movie management information
exists. If you select [Yes], new management
information is created and you can record or
play back movies.
US
Advertisement
Chapters
Table of Contents
